 |
|
 |
 |
|
|
|
Immersion Heater (120 and 240 Volt)
|
 |
Perfect solution for use in a portable baptistry or existing baptistry where a circulation heater is not an option.
- Available in 120 and 240 Volt Single Phase
- Immersion section of unit made of Incoloy or Stainless Steel.
- All heat confined to the formed horizontal section for optimum heat efficiency.
- Cold riser extends to the top of container where control housing is located.
- 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge.
- Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°).
- Hi-Limit cut out switch set at 125°F (±4°).
- Stainless steel mounting bracket also supplied for easy mounting.
- Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - Saves money.
- The 240 Volt heater will heat 60 GPH (40° R). A 750 to 1,000 gallon Baptistry can be heated in 13 to 17 hours, or one-half this time 20 degree rise in temperature. The 120 Volt heater will heat 20 GPH (40° R). A 100 to 200 gallon baptistry can be heated in 5 to 10 hours, or one half this time for 20° rise in temperature.
|
| |
|
| PBH Mini Baptistry Heater |
 |
This baptistry heater is recommended for portable baptistries.
- 120V
- 15' power cord with a GFCI for your protection
- completely assembled pump and heater and includes: suction and discharge fittings and the on off button. Simply mount the base down in the desired location, plumb the unit to your tank and plug it in.
- built-in thermostat will maintain constant temperature.
- will raise 200 gallons of water @ 3 degrees per hour
|
| |
|
| PBH 5.5 Baptistry Heater |
 |
This baptistry heater is recommended for baptistries of 700 gallons or less.
- Voltage: Pump 120v / Heater 240v
- Amperage: 30
- Watts: 5,500
- Recommended Wire Size: 10 gauge
- Pump Motor: 3/4 hp
- Pump Type: Centrifugal
- Plumbing Size: 1.5" PVC
- Rate of rise: 500 gallons from 70°F to 90°F in 7 hours
- Maximum distance from pump to baptistry - 50 plumbing feet
- GFCI Protected: NO
- Heating Indicator Light: YES
- Pump higher than water level: NO
|
| |
|
| PBH 10 Baptistry Heater |
|
This baptistry heater is recommeded for baptistries of 700 gallons or more.
- Voltage: Pump 120v / Heater 240v
- Amperage: 30
- Watts: 10,000
- Recommended Wire Size: 10 gauge
- Pump Motor: 3/4 hp
- Pump Type: Centrifugal
- Plumbing Size: 1.5" PVC
- Rate of rise: 500 gallons from 70°F to 90°F in 4 hours
- Maximum distance from pump to baptistry - 75 plumbing feet
- GFCI Protected: NO
- Heating Indicator Light: YES
- Pump higher than water level: NO
|
| |
|
| For information on any of our baptistry heaters click here. |
|
|
|
|
|
|
|
|
|
|
|